When Is Irrigation Maintenance Necessary?

Regular irrigation maintenance is important if you're interested in keeping your landscape looking great. Here are a few ways to do this. First, check sprinkler heads for clogs and valves for leaks. Inspect the pump system for leaks. This way, you can ensure that your system responds to changes in the weather. 

Regular irrigation maintenance

Maintaining a well-maintained irrigation system is essential for a landscape, especially if it's an important part of the management plan for your property. Proper irrigation maintenance by irrigation services Massachusetts ensures that your vegetation will continue to thrive and look its best. Not only is regular irrigation maintenance good for your property's landscape, but it also saves you money in the long run. In addition, proper irrigation maintenance can prevent costly problems down the line.

The first step to regular irrigation maintenance is flushing your system. Water should not be left in the system if excess debris has been collected. Next, it's important to check the PSI, which is the water pressure of the sprinklers. If the PSI varies significantly, the sprinklers may not be functioning correctly. If this is the case, contact an irrigation maintenance company for repair. These professionals will check your irrigation system and suggest the best course of action.

Checking sprinkler heads for clogs

If you've had problems with your irrigation system recently, it may be time to consider having it checked out. Sprinkler heads should be checked regularly for clogs and dirt. If they're not spraying at all, it could be due to a problem with the valve that controls water flow. If you have trouble controlling water flow through the system, you may need to consider replacing it.

Clogged sprinkler heads are an issue because they prevent water from flowing out. It can be the sprinkler head, a plumbing line, or a broken pipe. Regardless of the cause, a clogged head can cause the water to stop flowing and cause damage to the sprinkler system. Clogged sprinkler heads can be caused by debris in the head or the valve. In the worst-case scenario, water pressure will be reduced enough for mineral deposits to build up.

Checking valves for leaks

Performing irrigation maintenance requires checking your valves for leaks. Over time, valves may become clogged and fail to close properly. A leak in underground pipes may appear as wet spots, depressions, or small holes. 

Stone can cause a small hole in the valve diaphragm. A valve with this problem can continue to leak water continuously. If you notice any damage to the valve, you can easily replace it. 

A valve's diaphragm is a mechanism that opens and closes. You can check the opening or closing of the valve with a multitester. You can also check the wire terminals marked "24-vac." If the readings are low, you must replace the transformer. The diaphragm can be replaced, and zone valves can be tightened by replacing the valve diaphragm.

Checking pump system for leaks

Proper maintenance is essential for your pump system. You should change the oil yearly and check the ground and electric motor for frayed wires or other problems. Make sure you shut off your system properly before beginning maintenance. Also, lubricate the motor and check it for leaks. Pumps are an integral part of any irrigation system; if they are not functioning properly, your entire system could be out of commission.

The most obvious way to check if you leak is to shut off the water and watch for a water meter reading. You can then look for leaks in valves and lines to determine if there is a leak. You may need to call a professional irrigation technician if you don't see any water. Otherwise, you can perform the maintenance yourself. It's important to keep in mind that if you don't have a dedicated water meter, you can still check your system yourself.